Learn IR Codes does not work

daboytommy87
Beiträge: 16
Registriert: Mi 9. Nov 2016, 19:44

So 11. Okt 2020, 09:23

The lightmanager is connected. See attached screenshots.
Dateianhänge
2020-10-11 09_21_04-System information.png
2020-10-11 09_21_04-System information.png (16.15 KiB) 17099 mal betrachtet
2020-10-11 09_22_01-Light-Manager setup.png
2020-10-11 09_22_01-Light-Manager setup.png (40.91 KiB) 17099 mal betrachtet
2020-10-11 09_21_39-airStudio -  _.png
2020-10-11 09_21_39-airStudio - _.png (75.42 KiB) 17099 mal betrachtet
daboytommy87
Beiträge: 16
Registriert: Mi 9. Nov 2016, 19:44

So 11. Okt 2020, 09:27

Is there a way to program IR codes manually?
Please confirm whether downgrading firmware might be an option, if so, how I can achieve this.

Is there an option to send in the light manager for repair? Or what are the alternatives?

Thanks.
Benutzeravatar
rtwl
Beiträge: 1269
Registriert: So 30. Dez 2018, 18:08

So 11. Okt 2020, 10:40

just downgrade your air Studio Software and then Update Firmware via file (von Datei laden) then you have the Firmware fitting to your airStudio Software Version.
Peter
daboytommy87
Beiträge: 16
Registriert: Mi 9. Nov 2016, 19:44

So 11. Okt 2020, 20:03

Hi Rtwl,

Thanks for your reply.
Unfortunately the firmware version remains the same, and the issue still persists.
@jbmedia: what would be the appropriate next step?

Thanks.

Regards,
Tom
Benutzeravatar
jbmedia
Administrator
Beiträge: 4446
Registriert: Mi 17. Feb 2016, 13:42

Mo 12. Okt 2020, 18:50

Wehn looking at your screenshots we noticed that some GUI items are not translated. This is true for all items containing umlauts like ü, ö, ä. On the screenshot of the actuator administration the umlaut ä is even replaced by a question mark. This is really strange. What language does your Windows version have?

However, this does not explain the learn problem. First we have to find out if the learn command reaches the Light-Manager at all. For this purpose we made another test version. Please use the same download link as before, install it, run a firmware update. Afterwards open the page 192.168.xxx.xxx/lastpost.htm in your browser.

Now press CTRL-T in airStudio and then press set time. This is just to see if any command gets to the Light-Manager. Now start IR learning again. You should see somthing like that in the web page:

1.png
1.png (8.07 KiB) 17055 mal betrachtet
Is this true on your system?
Wir wünschen viel Spaß mit den Produkten und einen erfolgreichen Tag! Ihr jbmedia Team :)

daboytommy87
Beiträge: 16
Registriert: Mi 9. Nov 2016, 19:44

Di 13. Okt 2020, 22:17

Good evening JB Media,

Thanks for the provided support, really appreciating the help.
My windows language is currently set to English (United States), the language in airStudio is set to English (see screenshots).

I re-downloaded versie 9.9.1 and installed it, first time I tried to update the firmware it resulted in an error. The second try the firmware could be updated (see screenshot).
The lastpost.htm page resulted in a 404, until I removed the username and password from lightmanager setup and transferred the config back to the light manager.

After that I was able to open the page, the time was set successfully and the learn mode started working again.
I re-submitted the username and password, and the learning module is still working afterwards.

The last remaining problem now, is that i am no longer able to transfer the config to the light manager.
I will trie to downgrade to version 9.9.0 with the according firmware, to see if that resolves the issue and whether the learning module will still work.

Thanks for the support so far, and if you have any thoughts concernning the issue I am currently facing with the transfer of the config. Let me know.

Thanks.

Regards,
Tom
Dateianhänge
2020-10-13 22_11_50-airStudio - .asc.png
2020-10-13 22_11_50-airStudio - .asc.png (58.75 KiB) 17029 mal betrachtet
2020-10-13 22_12_51-Settings.png
2020-10-13 22_12_51-Settings.png (510.88 KiB) 17029 mal betrachtet
2020-10-13 22_14_06-airStudio - .asc.png
2020-10-13 22_14_06-airStudio - .asc.png (28.57 KiB) 17029 mal betrachtet
daboytommy87
Beiträge: 16
Registriert: Mi 9. Nov 2016, 19:44

Di 13. Okt 2020, 22:37

Last 2 images where not uploaded.

Regards,
Tom
Dateianhänge
2020-10-13 22_23_08-192.168.0.102_lastpost.htm_user=lm@vanleijseneu&pass=LmRocks2209@@.png
2020-10-13 22_23_08-192.168.0.102_lastpost.htm_user=lm@vanleijseneu&pass=LmRocks2209@@.png (32.52 KiB) 17027 mal betrachtet
2020-10-13 22_32_34-airStudio - config.asc.png
2020-10-13 22_32_34-airStudio - config.asc.png (65.03 KiB) 17027 mal betrachtet
daboytommy87
Beiträge: 16
Registriert: Mi 9. Nov 2016, 19:44

Mi 14. Okt 2020, 08:18

Tried to downgrade the firmware this morning, but the FTP connection is not initiated.
Error message remains when trying to transfer the configuration.

Disabling windows firewall + windows virus & thread protection did not make a difference, not for downgrading firmware nor for transferring the config.

Any assistance would be appreciated.
Benutzeravatar
Blackbird
Beiträge: 829
Registriert: Sa 20. Feb 2016, 17:51

Mi 14. Okt 2020, 09:52

Hey Guys,
just having the feeling there most probably is nothing wrong with the LMair
but that a Team-Viewer-Session would be appropiate here...
Benutzeravatar
jbmedia
Administrator
Beiträge: 4446
Registriert: Mi 17. Feb 2016, 13:42

Mi 14. Okt 2020, 10:25

daboytommy87 hat geschrieben:
Mi 14. Okt 2020, 08:18
Tried to downgrade the firmware this morning, but the FTP connection is not initiated.
Error message remains when trying to transfer the configuration.

Disabling windows firewall + windows virus & thread protection did not make a difference, not for downgrading firmware nor for transferring the config.

Any assistance would be appreciated.
You might reset the device to factory defaults and start over.

For test purposes we set our Windows to English (US) as well. It did not show these UTF8 character errors as expected. We have the feeling that there is something screwed up with your Windows installation.

However, we recommend not to enable login and password for the Light-Manager, at least not when any of these contain special characters. It is likely that these are transfered incorrectly and you might not be able to login.
Wir wünschen viel Spaß mit den Produkten und einen erfolgreichen Tag! Ihr jbmedia Team :)

Antworten